Tweet
Hello
I have Troegs Dreamweaver in my kegerator right now and I cannot get a good pour. Troegs advised me to set the pressure at 30 and the temp between 45-50. I then asked for the carbonation volume and they told me 2.7. According to the standard chart I will not get 2.7 at that temp and pressure. So I decided on a tempurature and set the pressure so the volume would be 2.7. 40 degrees at 14 lbs. Well, I've tried that and I get an excessive amount of foam. A full 1/2 liter glass of it. Even on the second pour after the tower line is cold. So, I changed my 4 foot beer line to 12 foot and get nearly the same results. I've messed with pressure by making it less and I get the same results. Any advise would be appreciated. Wasting so much beer.
Stefan
I have Troegs Dreamweaver in my kegerator right now and I cannot get a good pour. Troegs advised me to set the pressure at 30 and the temp between 45-50. I then asked for the carbonation volume and they told me 2.7. According to the standard chart I will not get 2.7 at that temp and pressure. So I decided on a tempurature and set the pressure so the volume would be 2.7. 40 degrees at 14 lbs. Well, I've tried that and I get an excessive amount of foam. A full 1/2 liter glass of it. Even on the second pour after the tower line is cold. So, I changed my 4 foot beer line to 12 foot and get nearly the same results. I've messed with pressure by making it less and I get the same results. Any advise would be appreciated. Wasting so much beer.
Stefan
Comment