Home Beer Retail Beer Commercial Closed Chemical Systems   
Results 1 to 1 of 1
  1. 03-16-2010, 02:46 PM #1
    Mark Borland's Avatar
    Mark Borland
    Mark Borland is offline Administrator
    Join Date
    Mar 2010
    Location
    Vancouver BC
    Posts
    17

    Default Read this before posting!



    Welcome to the Micro Matic Forums!



     Forum Rules...

      1) Please treat other members with respect at all times.

      2) Please do not post anything offensive or explicit.

      3) Please do not post advertisements or off-topic material.


      Before You Post a New Thread...

      1) Always [url=http://www.micromatic.com/forum/us-en/search.php]perform a search[/url] to see if your question has already been answered.

      2) Always conduct the following troubleshooting steps:

      a. Allow sufficient time for the keg to acclimate before tapping.

      b. Double-check to ensure your thermometer is calibrated properly.

      c. Get an accurate reading of the actual keg beer temperature by testing second dispense in same glass.

      d. Verify the carbonation volume level of your beer (see the "[URL="http://www.micromatic.com/forum/us-en/trouble-shooting-beer-quality-home/7243-beer-carbonation-levels-thread.html"]Carbonation Levels Thread[/URL]" for more information).

      e. Perform a [url=http://www.micromatic.com/keg-beer-blog/index.php/131/kegerator-leak-detection/]leak test[/url] before fine tuning your pressure.

      3) Always check the following resources to see if you can find an answer:

      a. [url=http://www.micromatic.com/draft-keg-beer-edu-cid-2477.html]Beer Articles & Learning Center[/url]

      b. [url=http://www.micromatic.com/draft-keg-beer-edu/beer-questions-cid-2297.html]Frequently Asked Beer Dispense Questions[/url]

      c. [url=http://www.micromatic.com/keg-beer-blog/]Scott "The Draft Master" Zuhse's Beer Dispense Blog[/url]

      d. [url= http://draughtquality.org/]Bewers Association - Draft Beer Quality Manual[/url]


    Last edited by Mark Borland; 03-16-2010 at 11:12 PM.
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Note:
Micro Matic’s Draft Beer Discussion forum is a public service which allows our members to share their draft beer knowledge and for visitors to view their discussions. While Micro Matic's Dispense Institute instructors and knowledgeable staff are often participates in the forum, Micro Matic does not attempt to verify information posted by members. The information which members post are personal views, and may not reflect the views of Micro Matic. Micro Matic takes no responsibility and assumes no liability for any information posted by members, or results that occur from the information. Micro Matic reserves the right to monitor, remove or edit content at its discretion.