i would build one. I have built several and converting is rather simple, If you want to save yourself some hassle make sure you have enough room in the freezer for the co2 cylinder. All the walls of a deepfreezer have coils in them so drilling a hole for the co2 is the hardest part. One can build a 2X4 frame on top and drill into that but I find it doesnt look to nice. Or drill into the compresser box and pass the line that way. But I found the easiest was to leave it inside the unit itself. Then all that is really left is cutting a hole in the top and connecting some tubeing. You can actully run the hoses then throught the light fixture area of the interior lid so that you dont have to cut any holes on the inside to give it a nice finished look. You may want to place some wood supports in the lid for added tower suppot. Good luck .
|