Perfect! Thanks. Already went to the Radio Shack here in DC near work and they don't carry any resistors. Will have to check the larger store by home tonight.
I did place the stock temperature probe in a glass of water inside the unit and placed a thermometer in the glass. With the Danby set to 36, the water lightly iced over and after a while the Danby displayed 34 degrees on the readout. Then later last night the Danby went back up to 39 and the thermometer in the water seemed to be within a degree of the Danby.
This morning I believe the Danby was showing 39, but the thermometer in the water was around 34-35.
Tonight I plan to place a 5 gallon bucket of water in the unit to test the water temp further. Not sure if I'll have time to do the resistor mod tonight though, but should have time to at least lengthen the wire on the probe so I can place it in the bucket.
I have time to play since I still have to get my c02 tank filled tomorrow evening and dig out a blower fan I know I have in a parts bin somewhere. Still need to order a 2 way secondary regulator and two tap tower as well. So I should have the temp issues squared away before even tapping a keg.
|