You can probably do this with a standard Keg Cooler.
It depends on how much space is between the bar and top of cooler.(minimal is best) remove the tower from the top of the cooler, install a piece of PVC pipe between the top of cooler and bottom of bar. 3 or 2 inch should be good, make the pipe short enough to fit but tight enough that no air can escape. stick the plastic tube that comes with a beer keg cooler up into the tower so the cool air flows through the entire tower. As far as adding two shanks, it depends on the brand of beer you are going to drink. Most coolers can only fit 1 standard keg (1/2 or 1/4) On the east coast Yuengling Lager is using skinny 1/4 kegs. It all depends on keg size.
|