[V]
I really hope somebody will be able to help me. As for my previous post my keg did freeze but the major problem now is the fan I installed. I had installed the fan on the right side at the top located about 3 1/2 inches away from the cold plat blowing toward the door. Now this has worked out great but the problems is when the kegerator is running the air temp is in the 22 F and when the Kegerator is not running depending on where the thermostat is will stay in the low 30's. My problem I'm having is I cant gauge where to set the thermostat it's to warm or freezing. The previous day I had turned the thermostat up almost all the way up and the air temp was sitting around 36 F with just the fan on all is well. I come home and it was a whopping 43F the Kegerator did not turn on at all. So at tis point I turned down to blitzkrieg which means freezing to bring down the temp. At this point my liquid temp was like 44 F madness now I don't know if the keg went bad and or how long it sat at this temp but by this morning it was back down to 37 F Liquid Temp and tasted fine. For what ever reason when the fan is on the kegerator seems to stay running more of the time if I unplug the fan it seems like the thermostat will turn on and off more consistently. If I tern the thermo down till it clicks off it will stay off and when the temp rises and it turns back on seems like it wont turn off again. I was thinking maybe a timer on the fan? I hope this makes sense to someone please help A.S.A.P Thank for any help !!!!!!