Thread: Adding a 90 degree elbow
View Single Post
  #4 (permalink)  
Old 05-12-2007, 12:54 PM
Scott Zuhse Scott Zuhse is offline
Super Moderator
  
Join Date: Mar 2005
Posts: 1,195
Default
Uncouple keg, remove hex nut from top of coupler and replace with this elbow and beer washer. Place Then place the earlier removed hex nut onto the elbow using beer washer. Recouple keg.
__________________
Scott Zuhse, Instructor Micro Matic Dispense Institute
Reply With Quote