Quote:
Originally Posted by dbigrunner
33K ohm 1/2W 5% Carbon Film Resistor pk/5
I found this on Radio Shack... for .99
will this work?
|
Yes, the RS resistor will work fine, here's what it looks like;
http://www.micromatic.com/forum/us-e...bytempsens.jpg. If your not sure about soldering the sensor it can be removed and you could have some else do it. It could even be soldered to the pins in the black connector, take them out first. If you have the J.C. controller you might be better off using that. The temp swings are much less and no defrost cycle which can be a pain. Psychodad's posts are in great detail on connecting it. Just check out the 5star thread.