I just took the faucet apart again and examined it very thoroughly. There is only 1 vent hole (mabe the second was chromed over during production?). I found the one in the front under the shaft, but I'm not sure what you meant by inside the throat.
There is no blower inside the kegerator, it's just a metal plate at the back that frosts over. No fans or anything inside to move the air around. I just poured off a small amount of beer, and the temp of the beer coming out of the tap is about 45 degrees. The liquid temp inside the main part of the kegerator is 35 degrees using the same thermometer in a gl*** of water. The tower has a very thin piece of insulation wrapped on the inside, and there is no shank running up the tower, the beer line connects directly to the back of the faucet. What's the best way to fix this problem?
Thanks!
Mike
Last edited by Mike5150; 12-10-2006 at 02:52 PM.
Reason: additional information
|