have you completely dis-***embled the entire system and checked for any burrs or rough edges in the shank and the faucet? the flow rate should be 2oz's per second. also check to see that there are not any kinks or twists in the line the actual kegerator should be fine I would look more into the faucet and the shank and the sankey right now.your temps and pressures are correct now,[that is if you are getting a true reading]some sankeys have a screw on probe tip you need to make sure you have a tight fit there and it is not allowing air into the line. also I do not remember do you get foam all of the time or does it clear up after a pour or two?
|