The liquid temp when I got home was 32 degrees, that was using a thermometer in a gl*** of water. I upped the temp on the external temp controler a few degrees because I know it can cause the beer to go flat if it's too cold. at the moment the temp in the gl*** of water is reading 36 degrees. The regulator is a single gauge which for the old keg was set at 12 psi (I am positive of this, I looked at the gauge right before I swapped kegs) I just double checked the setting right now and it's reading 14 psi, so I'm going to shake the keg and bleed the air to see what happens. This is a used kegerator that I bought off of ebay (now I know why I got it so cheap) I'm wondering if the regulator is bad. Is there a way to test it?
Mike
|