Quote:
Originally Posted by BeerBlast
THe BeerBlast Mixed Gas Generator would fix your issue. Like the others said, you are overcarbonating at 25psi. Using a 60/40 blend at about 15-18psi would most-likely fix all your issues and empty your kegs complete. Check your kegs after they blow and see how much you're giving back. It's usually about 10 pints = $30+ per keg. The BeerBlast will eliminate that. it's a nitrogen generator with a McDantim Blender all in one. BWW, Outback, and others have/are switched all their stores.
www.southteksystems.com |
What the ----?!?
He already said he doesn't want to use a mixer. Didn't I just see a post of yours elsewhere? Plugging the "Beerblast"? Again? I guess this is free advertising for your machine?
Afterdark: Let me simplify for you without all the complicated math. Your CO2 was WAAAAY too high so you were overcarbonating your beers. You dialed your CO2 too high because, with 5 feet of 3/16" as choke, you had too much resistance in your line to dispense properly.
If you have 50ft of 3/8 just 4 inches of 3/16 spliced to the end would do it. I realise this might not be practical (4 inches is a little short).
A more efficient way of doing it might have been 50 feet of 1/2"ID with 3.25 feet of 3/16"ID for choke.