Jake, we are attempting to put you in contact with an affiliate in your area. in the meantime, here are some tips for your coil system:
- Never place ice on the coils before you tap the keg. Always run beer through the coils first until you see a slight amount come out of the faucet. Otherwise , you may freeze the water in the coils left over from the rinse.
- Begin pressure around 30 PSIG (2.2 to 2.5 Bar)and raise until desired flow is obtained.
- Clean the system thoroughly to remove any residue in the coils.
- Tighten all fittings after system has cooled. Particularly the compression fittings behind the faucet shank.
Scott Zuhse, Instructor
Micro Matic Dispense Institute