I just bought a 7.2 Kenmore Chest Freezer.
After measuring what size kegs I can get in there I have another question. I have a dual tap tower and will probably go with the following configuration: one 1/4 keg and one 1/6 keg.
I noticed that if I drop the 1/4 keg on the right side of the compressor "step", which will be a very tight fit for the 1/4 keg, I could possibly be able to put a 1/6 keg on top of it as long as it's on it's side.
With the 1/4 keg in that positon I will only have about 18 inches of height to play with on top of the compressor "step".
Is it advisable to let the 1/6 lay on its side?
The other alternative is to build a 6X10 platform (6=width and 10=height)
This way it could be feasible that I could put an extra 1/6 keg for storage.
Please help me with my conundrum!
