I am still getting 1/2 glass of foam on the first pour; and the beer out of the tap is flowing at 38 F after the first glass. the beer line is inside the flex tube and i used electrical tape to seal the hole. I don't believe enough air is getting back into the kegerator due to the small area of the hole which only allows for a thin stream of air to recirculate. I was thinking of widening the whole to 2 inches, thus leaving a 1/2 inch on each side of the blower hose for air to easily return. Could I cause any damage to the unit by widening the whole from the frig to the tower?
|