[hodlofski]

I have built a kegerator from a new refriderator that holds two sixtles (sorry abou spelling) side by side. THere is a 20# co2 tank outside the unit with a two gauge regulator and a line and a splitter. Currently there is one single sankey tap on a keg of Yards Philadelphia Pale Ale, with a tap coming out the front door of the unit. I am about to add a second tap, with a sankey and a keg of Smuttynose Shoals pale ale...these will alternate with Yards IPA and some homebrew...and who know what else.

I have the fridge turned up to "max" but it seems to be running about 38 degrees on the thermometer inside...i just put a NSF instaread therm into a glass of water inside...i'll get back to you...I'm running at about 14 PSI on the regulator...

The first glass is ALWAYS really foamy...too foamy...second glass is okay..but then loses its head pretty quick...doesnt seem flat.

The beerline is about 4 feet or so...not long at all.

HELP! HELP! HELP!