I am dispensing Heineken right now with my CO2 set at 14. What should I do about the nipple on the shank? It's for 5/16 line not 3/16 ID line. I wasn't going to trim the 3/16 ID line right away, I was going to cut the 5/16 ID line as close to the shank as possible and use a 5/16 x 3/16 splicer to attach the 3/16 ID line and then trim back as needed. Will this work or do I need to replace the whole shank. I don't think the nipple seperates from the shank that I have currently.
|