i have an older kegerator that i have recently acquired and am having foam issues also. it holds 2 kegs and the co2 tank in it with a tower on top and 3 faucits on the tower. i can only get it down to about 42 to 44 degrees and the co2 goes through a distribution manifold to feed co2 to both kegs with one tank. the tower is a decent hight above the kegs and it doesn't seem to get very cold in the tower. from what i have read on a couple different forums the 5' of 3/16 line seems pretty standard but i wondering if i need more pressure for 2 kegs and if i need more length in hose because of the higher temp and high level of tower. any sugestions
|