What brands of domestic beers are you dispensing? If they are the same carbonation level, you can use the same pressures on both. If this for home use, a five lb. cylinder should be fine.
Use this
regulator feeding a
two way manifold if your carbonation levels are the same.
Use these
couplers with approx. 5" of
3/16" ID for beer line between the coupler and the shank in the tower and four feet of
red CO2 line from the manifold to the couplers. You will also need about six feet between the regulator and the manifold. A recommendation would be to place the cylinder outside of the kegbox and route the pressure line through the wall into the box to the manifold. Normally these boxes have a knock out hole near the back left corner of the box for routing.
Use this
crimper tool for the
.170(six) and
.133(four) clamps.
This
thermometer will tell you liquid temperature at all times. This
cleaning kit would be ideal for home use.
Scott Zuhse, Instructor
Micro Matic Dispense Institute