I had the same problem when i got my first keg. I know on the Haier unit it says to remove a black piece in the coupler prior to tapping. But that piece stops the ball from going into the beer line, thus it is very critical. If your beer lines are clear and then foams up very quick, this is the problem. You either need to order the new ball retianer if you lost the piece or simply replace it if you kept the parts. If for some reason you lost the retainer (if this is the cause) take the ball out of the coupler. I did this for about a day, and i had fast flow, but the beer\foam mixture was about 80% beer
|