Does your tower have a flex tube inside it with cold air routed through? If not, you may be experiencing gas breakout due to the difference in temperature at the tower.
Quote:
quote:Originally posted by redwing
Scott,
Thanks for your reply,
I'm home and I turn up the CO2 to 16psi my temp is 36 and the system is made by Micro Matic. When I pour my 1st glass lot of foam, then I poured a pitch and was just fine nexted, I tried pouring a glass and got about 1/2 foam in glass. What could be the problem, wiht pouring into a glass?
I did not use any soap with cleaning the glass. Used cold water.
I have read most all of this sites info to solve these problem with just my 1st kegerator.
This is a great form for us newbe's to kegerators
Thanks, Tom
|
Scott Zuhse, Instructor
Micro Matic Dispense Institute