Danby Kegerator - Controller
Guys...I'm new to the site and from what I've read so far you guys know your $hit so I'm hoping you guys can help me out. I purchased a used Danby Kegerator via Craigslist. The kegerator was in pretty good shape except for the fact the LED for temperature control did not work. Ultimately the first 1/4 keg I connected to it ultimately froze up (the condenser never turned off). I took it apart and noticed the controller board was fried most likely due to it getting wet and shorting out. The line coming into the board from power/condenser took the brunt of the short - the connector from the line and where it connects to the board was completed obliterated. I ordered a new controller board from Danby but they did not include the connector so I have no way of connecting the new board to the power line. Do any of you know what this connector is called (power connector?)? And where I can purchase one? Danby Customer Service Reps had no idea what I was talking about, Rexel was of no help, and RadioShack thought I was crazy. How do I splice the line coming in from the condenser/power to the controller board? According to a picture of the circuit board I found on this site, this connector adapter is labeled - L (black), N (white), and C (condenser) with one empty slot.
I'd greatly appreciate any insight any of you have in order for me have a nice cold tall one - AND SOON!
Larry
|