Quote:
Originally Posted by CoreyD
If you get a paintball tank with the on/off valve you do not need to worry about the pin. Also if you have a remote setup for the paintball tank the adapter can thread into the regulator no pin depressor needed.
|
My only concern would be the grade of the plastic hose on those remote tank relocators with a valve. Most of that is by no means "food grade" and you still have to worry about chemicals leaching via the co2 gas inflow. Then again I get upset when I have to use any material other than stainless steel.
Quote:
Originally Posted by CoreyD
Getting the left handed stem out of the regulator can be tough and might damage it.
|
AGAIN, if you use the one that More Beer has it works for both paintball tanks and std. Co2 tanks. If you are an adept DIY person you will have no problem switching the stem. If you are not a DIY guy, just be gentle and you wont have a problem..
but im guessing if you are a brewer then you are a diy guy..
-DIG