All foam low flow
I am a newbie with a Danby. I bought it used from a guy who never even plugged it in. I have a pony of Bud Light new co2 bottle full. Set at 12 psi. The keg has been in the fridge 16 hrs and I still get only foam at a very slow pour rate. the pour starts with a burp of foam and with in 20-30 seconds it stops then starts again. The foam flows only slightly larger than pencil lead. It takes
1 + minutes to fill a 12 oz glass of foam. I checked all the connections/couplers all were tight.
The only problem I could find was the coupler lever handle was missing and had broken at the base where the handle screws onto the shaft but still locks in. I am sure I have missed some important facts so if you have questions fire away. Thanks in advance for any and all help.
Bigsmooth
|