Ok, I'm at 38 degrees (liquid temp)and driving with 14 psi. Same problem foam is shooting at high pressures right out of my glass. I've disassemble everything cleaned the lines. Tried bleeding the C02 from the keg and gently raising it to the prescribed level and no change noted. As pointed out before, no problems when using 1/4 kegs. This is getting frustrating and expensive after days of failed attempts. Any suggestions would greatly be appreciated. I should add I do not believe the problem is at the faucet. Bubbles in my lines being created by the quick surge from my keg appear to be part of the problem. Thanks
|