There's a whole thread somewhere on here about "balancing" a system. Meaning that for your pressure, temp, vertical rise and in some cases geographical elevation you have the correct settings. If your temp. is correct, then the bud light should be fine at 12-14 PSI (anyone who knows the exact correct psi please add) and the factor that will dial in the speed is the line diameter/length. I've noticed a lot of guys that say they've been successful starting with 10 feet of 3/16" line and trimming back as necessary to achieve the right speed. All this is dependent of course on all the equipment being clean and in good working order. Good Luck!! This forum is the best source for draft beer info that I know of, you should be fine.
|