Foam? hmmmm :)
Hi All,
OK so the blower unit has been installed for a few days now...
I used a PCI Slot Computer fan feeding a few feet of tubing directly up the tower. The PCI fan resides right at the bottom of the kegerator to draw the coolest air...I also have a small video chipset fan mounted to circ some air around...
The tower is VERY cool now...so much so that the tower sweats a bit...I now also have it insulated 'temporarily' with two wool socks...looks kinda funny but works...
The oddest thing is though..while I had some initial foam on the first glass..I thought it was a heating issue....once the first half/full glass is drawn foam is no issue after that for the next couple...then i guess as it heats up a bit foam again till the coolest beer comes out......the CO2 tank is at 11PSI for a keg of moretti...
But even with the tower being VERY cool I still have the foam issue on the first half glass draw...
strange...any thoughts...
|