You sir are truly blessed! I have set up a similar system for a private customer for his deer camp. I used a 10lb. canister with a primary regulator and ran it to the first regulator pack(3).then I took out the allen screw on the opposite end of the regulator pack and installed a nipple to run co2 line to the second regulator pack. Use 3/16 ID line instead of 3/8 line. Keep your co2 lines as equal as possible in length. Ok, after pressuring up the co2 side of your system and its leak free,set your primary side regulator approx. double what you will be running at the secondary regulator.for instance,30 primary for 15 at secondary.Start low 20/10 for a baseline, and adjust as needed.The system I installed is still purring after 3 1/2 years with minimal trouble.I sure hope this helps,be sure to give your queen a big smooch! Best of luck,brianatkcdraft.
|