Quote:
Originally Posted by RickDel
Skinsfan1311, Thanks for the reply.... I'm curious, does your blower have a threaded exhaust hole or did you just force it in tight enough to stay? I have the newer model 12cfm blower, , and it's NOT threaded.
What'd you use for a bracket/mount for the Dayton?
|
The exhaust hole is not threaded, but the fitting is tight enough to stay. I started it hand-tight, then I took a wrench and put a turn on it.
I compared the specs of your newer model, to mine, and the exhaust outlets have the same diameter, (1 1/4").
There is a bracket made specifically for the Dayton blower. You should be able to check the Grainger web-site, or call them and tell them the model blower that you have and they should be able to hook you up. I strongly suggest the bracket, as it makes the installation quite easy.
Good luck, and don't forget to post pics after you're done!