I was still getting all foam this morning. I read about over carbonation and decided to try something. I shut the CO2 off at the bottle and released the pressure on the coupler. Then I uncoupled the keg, took it out and rolled it around for a couple minuets to separate some CO2 from the beer. I put it back in the kegerator and hooked it up again. I released the pressure before turning the C02 bottle back on. The pressure is set at 12 psi and the temp. controller set at 37 with a differential of 2. I don't have a way right now to calculate the beer temp. So, it kicks on at 38, goes down to 35 and shuts off. It took a beer or two to clear the foam from the line but then it poured a good beer. I haven't seen that for a while! I'm going to let it sit until this afternoon and see if I'm back in foam town. I'll keep my fingers crossed.
|