Well, the resistor mod seems to be working, when the control board wil co-operate. My quart of water was froze solid yesterday morning, but compressor was still running. I unplugged it for the day and let it defrost. Plugged it up last night and it acted crazyfor a few minutes, and then took off and started working again. I unplugged the keypad and ran it down to 36 by shorting the correct two pins together. Put it all back together and then camped out next to it and babysat it for about 4 hours. It was cycling on and off exactly as it should, and was still running "properly". Dispaly temp was 37 and my liquid temp was 32, so i gained the 5 degrees with the resistors. new control board will be here in a coupla days. Well see what happens.
|