View Single Post
  #1 (permalink)  
Old 04-27-2008, 11:04 PM
RickDel RickDel is offline
Senior Member
 
Join Date: Mar 2008
Posts: 72
Default Newbie here.. Please review my purchase list

Mod, this can be deleted.... I have EVERYTHING except my pipe/tubing to house my beer lines - couldn't find much on that


Ok, I'm finally ready to build my freezer conversion. I plan to have two kegs with a 5 to 7' air cooled line to my dual tap tower located on my bar top. Can you please review my purchase list to see if I'm buying the correct items, or if there's anything I need to add.


3" Column - 2 Faucets - PVD Brass - Air Cooled
http://www.micromatic.com/draft-keg-...743DT-PVD.html
$194.95

Surface Mount Drip Tray, with Cutout, with Drain, PVD Brass
http://www.micromatic.com/draft-keg-...920DSSPVD.html
$204.95

Brewer's Edge Digital Temperature Controller II
http://www.micromatic.com/draft-keg-...s-pid-E54.html
$109.00

2 D System Couplers
http://www.micromatic.com/draft-keg-...pid-7485E.html
$29.95 x 2 = $59.90

Premium Series Dual Primary CO2 Regulator
http://www.micromatic.com/draft-keg-...2-Battery.html
$100.95

5 lb. Aluminum CO2 Cylinder, Empty
http://www.micromatic.com/draft-keg-...d-430A-5E.html
$56.95

1/4" I.D. Clear Vinyl Hose - 50' Coil
http://www.micromatic.com/draft-keg-...d-548C600.html
$37.50

Red Vinyl Gas Hose & Reusable Snap Clamps
http://www.micromatic.com/draft-keg-..._SNP-10x4.html
$8.40

4 Stainless Steel Screw Clamp Size Range - Up to 5/16" Vinyl & Poly
http://www.micromatic.com/draft-keg-...-pid-705W.html
$.80 x 4 = $3.20

2 3/16" to 1/4" Stainless Steel Splicer
http://www.micromatic.com/draft-keg-...id-SSS-BE.html
$1.80 x 2 = $3.60

Blower - 12 CFM
http://www.micromatic.com/draft-keg-...pid-2C782.html
$85.95

Hanger Bracket for 12 CFM Blower
http://www.micromatic.com/draft-keg-...pid-2C703.html
$23.50

10' x 1" Blower Hose - 12 CFM Blower
http://www.micromatic.com/draft-keg-...d-1651-10.html
$39.50

Flexible Aluminum Duct - 2-1/2" O.D. (Or PVC)
http://www.micromatic.com/draft-keg-...-1630-2.5.html
$127.50

2 Insulation 2-5/8"ID x 3/4"Wall
http://www.micromatic.com/draft-keg-...ES-FRI258.html
$27.50 x 2 = $55.00

PLUS: $350 for my Whirlpool 14 cu ft freezer gives me a total around $1,500.. WOW!! that's a little more then I wanted to spend, but if I can get a cold beer from the first pour it will be well worth it to me.

Any advise is GREATLY appreciated.... THANKS!!!

Last edited by RickDel; 06-03-2008 at 07:49 PM.
Reply With Quote