I've had a similar problem. Have two 1/6 in my kegerator now. The Boulevard Pale went thru just fine. The Bud Select is foamy.
To be specific, it is 5-10 minutes between pulls. The first pull is as expected (foamy), but the second pull also starts out a bit foamy. You can see the "wildness" as it comes out of the tap (before it hits the cup). However, that wildness clears up within a second or two.
I believe this is all happening because of some air forming in my beer line between pulls. I had read that this might be due to low pressure, so I upped the pressure from 12 to 13.5, and made sure the temp was lowered (from about 40 to 37). Still same problem.
Once the beer is flowing, it looks fine. Just the first couple of seconds as the beer in the line comes out.
Any ideas?
|