Scott, Thanks for the EXCELLENT reply!!!
I'm planning on a freezer conversion so I don't think I'll have any problems cooling an extra 5 to 6 feet of 3" PVC.
Whan you say, "at least 1/2" inch closed cell insulation" do you mean thicker is better or is that enough.
I also plan to use a 15 CFM blower. I see the micromatic FAQ's pages states that the max length for this size blower is 5', but do you think I can push it an extra foot or two if necessary? (I'm still no exactly sure about my lenths until I put the PVC and tower together)
I totally understand your second paragraph, but I'm a little shaky on the line lengths, diameters, PSIG's, and flow rates. I was planning on getting a
Dual Primary CO2 Regulator because if I understand correctly I'll be able to have two different kegs/beers with different PSIG. Am I correct?
Thanks