Quote:
Originally Posted by dbaird6154
Sorry, but I'm new at this. I was going to install a Brewers edge controller onto the Danby since my LCD panel is not working correctly and I thought that I would have to by-pass (by re-wiring the unit) the auto defrost. I read earlier that someone entered the control box and somehow re-wired the unit.
Please help
|
Here's the link that shows the before and after wiring mods.
Danby Kegerator Improvements If your unit has this drawing on the back it will work fine. When I did mine I cut and spliced the wires down at the compressor, so I did not have to pull the top off. If you plug the unit into the wall after doing this the compressor will always run, just to test, then plug it into new controller.