Ok, so I'll have the 3" duct going leaving the Danby and going to the top of the bar to the tower, traveling about 6" out in the open under the bar. Inside that 3" duct I'll have the two beer lines coming from the tower down to the kegs inside.
But instead of just blowing cold air up into that 3" duct, I should run a hose from the blower to inside the duct to the top of the tower and let the lines and tower cool that way?
Just want to make sure we're on the same page and understand the tower is on the bar and not mounted on the Danby.
Thanks for the advice.
|