>>What brand of beer are you dispensing.
It is Alaskan Amber.
>>Also, this coupler has a threaded probe tip that if it is not tight and sealed, >>could cause an issue.
Is there anything special about tightening the probe, (amount of torque)?
>>Last, conduct a pressure leak test to be certain that your system is tight.
I soaped all the connects and it passed. I have also had the system going for up to three weeks with a small 5 pound tank going and its still full (so I would assume no leaks)
Are there any parts inside the coupler that should NOT be lubricated when its cleaned and disassembled?
|