[beerdrinker13]

After giving it some thought, I decided to take my thermostat sensor out of the glass of water(thermostat on controller was reading 38 degrees while the temp in my 2nd pour of beer was reading 41 degrees) and I taped the sensor as high up the kegerator as I could get it. My temp on the controller instantly went from 38 degrees to 50 degrees! I let the kegerator cool back down to the 38 degree mark on the controller, and then I poured my beer and now I'm getting a reading of 36 degrees on my 2nd pour! I feel like I can't win in getting exactly 38 degrees on my 2nd pour of beer! I now decided to take the glass of water and place it on top of the keg and put the sensor back in the water, to see if it makes a difference with the glass being higher up this time. If this dosen't work, I guess I will go back to taping the sensor up as high as I can get it, and then raising the temp on the thermostat to maybe 40 degrees to try to get the 38 degree temp inside the keg. Any other suggestions would be greatly appreciated!