You Are Here:  
Beer Equipment Store > Beer Line Cleaning Kits > Electric > Use on 300' plus beer lines
North America (change region)

Electric Re-circulating Line Cleaning Pump

You Are Here: 
Beer Equipment Store > Beer Line Cleaning Kits > Electric > Use on 300' plus beer lines
 
Electric Re-circulating Line Cleaning Pump
New Product!
Price: $960.00
Availability: In Stock
Part #: EBC300PLUS

Re-circulating Line Cleaning Pump - for runs over 300'

Electric high performance re-circulating beer line pump - for cleaning runs over 300'. Our best model delivers thorough and efficient beer line cleaning.

Re-circulating cleaning chemicals when line cleaning is the best choice for long draw systems over 20 feet. Re-circulation creates a turbulent flow that is more effective than simply allowing the cleaning chemical to soak in the line. Compare the results achieved when using a re-circulating pump when beer system cleaning – your customers will taste the difference!

Features:
  • Corrosion Resistant: Hard coat finish on pump components to resist cleaning chemical corrosion 
  • Portable: Cordless design & quick disconnect hoses for easy transport
  • User Friendly: Case mounted On/Off switch
  • Temperature Resistant Hose: Hoses (6' length) remain flexible at low temperatures
  • Robust: Powder coated case for durability
Specifications:
Capable of effectively circulating runs over 300'
Motor: 5.3 Amps, 115 volts, 60 hz
Manual bypass valve to control pressure and flow
Dimensions: 9"H x 10-3/4"W x 15"L
Weight: 37 pounds
 
Ensure clean beer lines in a long draw system with regular line cleaning. Always:
  • Use proper "brewery approved" cleaning chemicals
  • Use a turbulent circulation action for a minimum of 10 minutes
  • Circulation cleaning is more effective than simply soaking a beer line with cleaning chemical

Clean draft beer systems result in:

  • Fresh tasting beer
  • More profit for the retailer
  • More keg sales
Use an electric re-circulating line cleaning pump, the best way to clean a draft beer system.  Your customers will taste the difference!
 
 
PUMP MAINTENANCE  

The EBC300PLUS line cleaning pump features an internal screen to trap contaminant particles before they would go through the pump. The screen needs to be cleaned periodically for the pump to function properly and to prolong the life of the pump. 

The pump will not prime or pump if the screen is not clean.

It is recommended that the screen be a cleaned on a routine basis of every two months, or more frequently depending on pump usage and line cleaning conditions.

To service and clean the internal screen:

  1. Remove the red housing cover on the pump (the one with the Micro Matic logo).
  2. Locate the pump (the brass part hooked to the motor) and remove the large nut on the bottom of the pump.
  3. Removing this nut will expose the screen. Clean the screen with a brush and water.
  4. Reinstall the screen and replace the cover.

 
Customer Reviews

Review this product