Stout Beer Door Kegerator Conversion Kit

Stout - Door Kegerator Conversion Kit (Less Keg Coupler and Gas Cylinder)

The unique stout faucet has a built in stainless steel restricter plate that the beer is forced through creating the distinctive cascading head with these type of beers. This plate breaks the nitrogen out of the beer creating a cascading head on the poured beer.

This plate must be left in place and cleaned frequently to remove any buildup that may clog the tiny holes in the plate.

The gas is a 75% Nitrogen / 25% CO2 gas blend and is commonly referred to as Guinness gas. This gas blend is inappropriate for ales and lagers, as it will change the CO2 content and thus the flavor of these beers.

Purchase cylinders of mixed gas locally. We recommend inquiring with the store you are getting your kegs from for a local source of mixed gas, or look in your phone book under Gas or Welding supply stores. Request gas that is used with beverages, and in a nitrogen cylinder with a female valve.


Although most bars and restaurants store their stout beers at the 36-38°F temperature (which is critical for most non-pasteurized ale and lager type of draft beers), most breweries recommend their stout beers are served at a temperature of 42°F to get the best flavor attributes of their product.

• Enjoy fresh, cold stout draft beers at home by converting an existing refrigerator into a Kegerator.

• Dual gauge Nitrogen regulator that features a solid forged brass body, wire mesh inlet filter, quad-ring inlet seal, built in pressure relief valve, 0-60 and 0-3000 PSI gauges, and a 3/8" O.D. outlet barb with shutoff.
• 4’ of red Thermoplastic super vinyl gas hose with re-usable snap clamps.
• An option to choose the "U" system keg coupler that is used for stout beers such as Guinness®  or the "S" system keg coupler that is used for stout beers such as Murphy's®
• 5’ long super vinyl beer hose assembly. This brewery approved hose will not rot, swell, or dry out and is unaffected by normal beer line cleaning chemicals. Pre-assembled with hex nut and neoprene washer on one end for connecting to keg coupler.
• 4" long PVC door spacer that allows secure shank installation without crushing the refrigerator door insulation.
• 4 1/2" long nipple shank assembly. The one-piece construction prevents leaks, and the barbed fitting allows easy connection of the beer line assembly. Includes shank, forged brass locknut, plastic flange, coupling nut, sleeve, and snap ring.
• Premium quality chrome plated solid brass beer faucet. Features a chrome plated forged brass body, a Teflon lever washer for smooth consistent performance and easy operation, a solid brass faucet lever, and a chrome plated bonnet, shaft, and collar.
• High gloss black plastic faucet knob.
• Faucet wrench for easy tightening the faucet to the shank.
• Patented SmartStrip Beer Volume and Temperature Monitor for accurate reading of beer keg remaining contents & temperature using thermometric technology.
• Complete, detailed easy to follow instructions for quick installation.