40" Stainless Steel Surface Mount w/ Glass Rinser, 4" Column
Designed specifically to fit Metropolis H style draft towers.
Tray wraps around tower pedestals for a nice clean finish.
Easy installation: simply drill one hole to locate and secure.
Robust 18 gauge stainless steel construction.
Welded corners, finished smooth for safety and appearance.
Fast draining, precision perforated screen.
Center mounted solid brass drain.
Condition the glass the moment before dispensing the beer:
Rinse away any impurities that might be in the glass.
Chill the glass utilizing cold water.
A wetted glass pours better.
Rinser Water Inlet Installation:
Always check local plumbing codes first.
Install in-line water regulator set at 15 PSI from the street water supply (no greater, perfect operating pressure).
Install in-line one way check valve from the street water supply (prevents pressure drop which can cause leaking).
Install in-line shut-off for the rinser system from the street water supply (this must be turned off nightly).
If teed into soda system make sure system can handle the increased water demand.
Have plumber install a 45° 1/2" O.D. barb for the drains if line is not hard plumbed into the system.
Install a shut-off for the water supply if line is not hard plumbed into the system.
Product Specification Sheet
Product Specifications Sheet (PDF 278k) 0312
Series TypeSurface Mount
Dimensions40"L x 8"W x 1"H
FinishBrushed Stainless Steel
DrainThreaded Brass 3-1/2" x 1/2" I.D.