Home Beer Retail Beer Commercial Closed Chemical Systems   
You Are Here:  

Pressure

You Are Here: 

Frequently Asked Draft Beer Questions

Pressure

1.

Pressure: What pressure do I need to set the CO2 beer regulator at?

Hits: 99813  / 515
When dispensing keg draft beer, the goal is to keep the CO2 level prescribed by ...
 
2.

How do I set a regulator?

Hits: 17591  / 82
Close the shut-off valve on the regulator, and open the valve on ...
 
3.

What is the difference between a regulator with one gauge and one with two gauges?

Hits: 32275  / 174
A typical single gauge CO2 gas regulator has a ...
 
4.

How do I setup the gas equipment for two draft beers that require different CO2 pressures?

Hits: 8990  / 10
When dispensing multiple draft beers that require different CO2 pressures ...
 
5.

Do gas regulators need to have check valves?

Hits: 10939  / 22
A gas check valve is a one way device allowing gas to flow only in one direction ...
 
6.

How many kegs of draft beer can be dispensed out of a CO2 tank?

Hits: 84307  / 333
As a general rule of thumb, it takes about a ½ Lb of CO2 to dispense ...
 
7.

Where can I get a CO2 cylinder filled?

Hits: 58927  / 226
Average cost for filling a 5 lb cylinder is ...
 
8.

Do I need to keep the CO2 tank inside the refrigerator?

Hits: 78265  / 262
Gas cylinders are often located ...