Beer CO2 Gas Cylinder Tank Auto Changeover

TankChange CO2 - Automatic Gas Cylinder Switchover

Product Images

TankChange CO2 - Automatic

Description

TankChange CO2 Automatic Cylinder Switchover

Automatic Gas Cylinder Switchover
TankChange is a cost-effective, automatic cylinder switching unit that works with any beverage gas cylinder up to 3000 psi. TankChange provides a seamless switch between the cylinders, ensuring a continuous supply of beverage gas - especially important during peak periods. Easily installed TankChange works with existing beverage gas regulator and requires no maintenance.

Features:
  • Simple fast installation!
  • Works with CO2 gas cylinders.
  • Keep bar staff available to serve customers.
  • Hands free automatic cylinder switching.
  • Most affordable auto-switchover on the market.
Installation & Use:
  • Securely mount the TankChange unit to the wall.
  • Mount a primary (tank-mount style) gas regulator to the outlet port on the left hand side.
  • Connect black gas hose leads to CO2 gas cylinders.
  • Reading the gauges: Tank 1 gauge is the left hand one on the gas regulator; Tank 2 is the right hand one mounted to the TankChange housing.
  • Tank 1 is the primary gas cylinder. The unit always draws gas from this cylinder first. When the Tank 1 cylinder reaches 200 PSI, TankChange automatically switches over to Tank 2.
  • When Tank 2 empties completely, TankChange switches back to Tank 1 to empty it. With only 200 PSI, Tank 1 will empty quickly.
  • The left hand side mounted primary regulator is responsible for regulating output pressure. Either a low pressure (60 PSI) or a high pressure (120 PSI) regulator can be used.
  • Empty gas cylinders can be safely removed at any time. If there is gas in the other connected cylinder, system will continue to operate.
  • Changing the gas cylinders, use suggestion: When Tank 1 is empty, turn both cylinders off. If Tank 2 is still mostly full, it is left unchanged, and Tank 1 is replaced with a fresh cylinder.  If however, Tank 2 has been used significantly, it is moved to the Tank 1 position and Tank 2 is replaced with a fresh cylinder.
  • NOTE: If you remove Tank 1 without turning off Tank 2 gas will escape from the Tank 1 hose.

PLEASE NOTE: Nitrogen model available, see MMTC-2N.

Product Specification Sheet
 Product Specifications Sheet (PDF 1.34MB) 0912
Get Acrobat Reader

Operation:

  • Maximum output pressure is 200 PSI.
  • Internal regulator maintains 200 PSI output pressure.
  • Tank 1 (on the left side) is the primary gas cylinder. When remaining gas pressure reaches 200 PSI, TankChange switches to Tank 2. NOTE: Primary regulator mounted on the left side will continue to read 200 PSI on high pressure gauge when drawing from Tank 2.
  • If there is a gas cylinder connected to the Tank 1 lead with over 200 PSI, TankChange will always draw from Tank 1 first.
  • When Tank 2 empties, TankChange switches back to Tank 1 and uses remaining gas pressure until exhausted. NOTE: If Tank 2 gauge is at zero (0) PSI, and the primary regulator gauge is at 200 PSI or less, there is 1% or less useable gas, both cylinders should be replaced with full cylinders as soon as possible.
  • Changing the gas cylinders, use suggestion: When Tank 1 is empty, turn both cylinders off. If Tank 2 is still mostly full, it is left unchanged, and Tank 1 is replaced with a fresh cylinder.  If however, Tank 2 has been used significantly, it is moved to the Tank 1 position and Tank 2 is replaced with a fresh cylinder.
  • NOTE: If you remove Tank 1 without turning off Tank 2 gas will escape from the Tank 1 hose.
  • Changing the gas cylinders, use suggestion: When Tank 1 is empty, turn both cylinders off. If Tank 2 is still mostly full, it is left unchanged, and Tank 1 is replaced with a fresh cylinder.  If however, Tank 2 has been used significantly, it is moved to the Tank 1 position and Tank 2 is replaced with a fresh cylinder.
  • NOTE: If you remove Tank 1 without turning off Tank 2 gas will escape from the Tank 1 hose.

New Product!

Specifications

TypeAutomatic CO2 Gas Cylinder Switchover
FittingsCO2 Female Connections
Maximum Output Pressure200 PSI
Changeover pressure185 psig +/- 15 psig
Hose Lead Lengthapproximately 30"
Outlet FittingCO2 Male Threads
Size3"W x 5-1/2"H x 1-1/8"D
Customer Reviews